The CR150 (2015) downpipes come with only ONE sensor fitting for the O2 sensor. Everything else post turbo is deleted in the Malone tuning and should be unplugged completely from the vehicle at their connectors.
Increase the performance, reliability and fuel economy of your 2015 VW Jetta/Passat TDI by eliminating the restrictive Diesel Particulate Filter (DPF), Exhaust Gas Recirculation (EGR) system, Adblue Injection system and factory catalytic converters, thus allowing the exhaust to flow more freely.
This 100% Bolt-On package includes all the hardware you will need for a complete DPF, EGR & Adblue delete. This ECO Kit (Economy Package) is designed to eliminate the Diesel Particulate Filter, Exhaust Gas Recirculation system as well as the factory catalytic converters and Adblue injection system while utilizing the stock muffler and tail pipe. With this setup you should expect that the exhaust will be just slightly louder than stock but not by much since the stock muffler remains in place. If you are looking for stock like silence, we highly recommend one of the Resonator options.
The DPF Delete downpipe is built to last with 304 grade stainless steel and the worlds most reliable aftermarket flex pipe. Rawtek has engineered this downpipe to be as good as it can be. With a smooth flare from the turbo outlet to the large 2-3/4" ID constant diameter tubing, nothing will outflow this downpipe. There is even a centering sleeve on the inlet which helps locate the downpipe on the turbo as well as maximize exhaust flow and prevent leaks.
- DPF, EGR & Adblue Delete Downpipe
- DPF, EGR & Cat Delete Midpipe
- Hardware Kit - for VW TDI CR150
- EGR Cooler Bypass Kit
- EGR Block Off Plate
- Exhaust Clamps, Nuts Bolts, Etc.
- Reducer 3" to Stock
- Up to 185 horsepower (+35 hp)
- Up to 323 ft-lbs torque (+73 ft-lbs)
- Up to 20% better fuel economy (+10 mpg)
- Longer turbo life (no more DPF)
- Clean Air Intake Manifold (no more EGR)
- Longer engine oil life (no more EGR)
- Fix intercooler icing problem (no more EGR)
- 304 Stainless Steel Construction
- Downpipe: 3" OD Schedule 10 pipe (1/8" thick)
- Midpipe: 3" OD 16 gauge tubing
- Stainless Steel EGR Cooler Bypass Kit
- Aluminum EGR Block Off Plate
- Easy to follow step by step installation guide (see bellow)
- 100% bolt-on
Will fit the following North American spec vehicles with DPF (diesel particulate filter):
- VW Jetta 2.0L CR150 TDI (2015+)
- VW Passat 2.0L CR150 TDI (2015+)