Increase the performance, reliability and fuel economy of your Sprinter 3.0L by eliminating the restrictive Diesel Particulate Filter (DPF) and factory catalytic converters, thus allowing the exhaust to flow more freely. This can be a huge benefit for small and large business owners alike. Save on long term repair expenses while gaining immediate fuel economy, it's a win/win!
This package includes all the hardware you will need for a complete DPF delete. With this setup you should be aware that the straight pipe configuration has a severe drone while highway driving and is significantly louder than the factory setup. if you are looking for stock like silence, we highly recommend one the Resonator option.
Unlike other products on the market, we took the time and effort required to utilize the stock mounting bracket on the engine block. Incorporating this into our design keeps as much weight as possible off of your turbo, ensuring that this product will not put added stress and wear on the turbo, because let's be honest, that's the last thing you need!
The DPF Delete downpipe is built to last with 304 grade stainless steel and the world's most reliable aftermarket flex pipe. Rest assured that all required sensors will be plugged back in where they belong in the new downpipe. Made from 304 stainless steel, you can be certain it will outlast any warranty out there,that's why ours is a lifetime warranty
All of the hardware needed for installation is included.
- DPF Delete Downpipe - for Sprinter 3.0L
- DPF Delete Exhaust 3" Midpipe for Sprinter
- Reducer Adapter - 3" Midpipe to Stock Exhaust
- 3" Exhaust Strap Clamp (3)
- Better fuel economy - with proper tune
- Longer turbo life (no more DPF)
- 304 stainless steel
- 3" OD 16 gauge tubing
- 100% bolt-on
Will fit the following North American spec vehicles with DPF (diesel particulate filter):
- Mercedes Benz Sprinter 3.0L (2010-2019)
- Freightliner Sprinter 3.0L (2010-2019)
- MUST UNPLUG THE SCR CONTROLLER. The location of the adblue controller may vary, here is a picture of likely placement.
- The NOx sensors and SCR (adblue) injector should be unplugged as well.
- Unplug DPF pressure and temperature (EGT) sensors too.
- IF YOUR CAR HAS A NO START MESSAGE, ENSURE YOU COMPLETE TUNING PRIOR TO RUNNING OUT THE COUNTDOWN. SHOULD YOU REACH THE NO START SCENARIO, YOU MUST USE MBSTAR PROGRAMMER TO RESET NO START CODE.